World at War Primer: Assaults and Overruns

Sorry for my absence the last couple of weeks.  I'm in the middle of changing jobs and working on a grad thesis, which hasn't left a lot of time for gaming.  In any case, let's get back to some World at War goodness!  Thanks to a comment from Pascal, I'm going to do a short article on Assaults and Overruns, two very important aspects to the World at War system.

Assaults and Overruns occur when two enemy forces occupy the same hex.  This represents the dirty business of close-quarters no-holds-barred down in the mud combat.  The major difference between an assault and an overrun is that assaults occur when:
  • vehicles fight each other in any terrain 
  • vehicles and infantry fight in defensive terrain
  • infantry fights other infantry in any terrain
An overrun occurs (hopefully rarely) when:
  • vehicles fight infantry in open or open hill terrain
An overrun basically represents the terror of vehicle units speeding into an infantry hex and running down guys, firing at point blank range, and using their impressive firepower to simply wipe out anything that does not have protective cover.  

The procedure for assaults and overrun is very simple but there are a couple of mechanics to keep in mind.  First off,  combat results take effect after both sides get in a round of fighting.  So it really doesn't matter who is entering the hex first in this case.  

Secondly, defensive terrain does not modify the combat rolls - except in the one case when infantry and vehicles are fighting in a city hex.  

Third, you cannot "aim" for a particular unit in a stack when you are in assault or overrun combat.  Hits are distributed equally among the units in the stacks.  So when you have two infantry units in a hex and they take two hits in an assault, the top-most infantry takes one hit and then the bottom infantry unit gets the second hit.  If there's an odd number of hits to distribute then just roll a 1d6 and give the top unit the third hit on a roll of 1-3, the bottom unit gets the hit on a roll of 4-6.  

Finally, after the assault is resolved, one side will be moving out of the assault hex.  If the defending unit takes the same or fewer number of hits than the attacker (the side that moved into the hex) then the defender wins and gets to stay in the hex.  The attacker must retreat back into the hex from which it came.  If the attacker gets more hits than the defender, the attacking unit stays in the hex it is assaulting and the defender must retreat one hex away in the exact path from which the assault came or else it is destroyed.

Assaulting is very simple.  You simply add up the assault factors on the counters participating in the assault and you roll the total number of dice to hit.  The assault factor for each unit can be found in the lower right corner of the counter as shown here:

So in this case, the Abrams will be rolling 2 six-sided dice and a hit is achieved on a 4 or higher.

Let's have a very basic example, shall we?



In the example above, the T-72 enters the hex in G2 with the Abrams.  Assault begins.

The T-72 rolls 2 six-sided die and gets a 4 and a 1.  The T-72 will score 1 hit on the Abrams.

But wait!  Before we assign the hit to the Abrams, it gets to fire back at the T-72.  The Abrams rolls its assault factor (2 dice for 4 or better) and gets a 6 and another 6.  The Abrams scores two hits on the T-72.  Now we can assign the hits.  The T-72 is disrupted and reduced while the Abrams is merely disrupted.

In this case, because the T-72 has taken more hits than the Abrams, it must retreat back into the hex from which it came (in this case, H2).  The Abrams stays in the G2 hex.  These results are shown below:

Post-assault


It is important to realize that the lack of an available retreat path (due to the path being either off the map, through enemy-occupied hexes, or in illegal terrain such as water or rivers) needs to be available or the retreating unit is destroyed.  Below we have an example where the lack of a legal retreat path destroys the retreating unit:





In the example above, the T-72 enters hex F12 and assaults the Abrams.  The T-72 scores one hit on the Abrams while the Abrams scores no hits on the T-72.  Normally, the Abrams would be able to take the hit and retreat back to another hex to fight another day.  However, the hex behind the path of the assault is a lake/water hex so the Abrams is actually destroyed.  A wreck marker is placed in hex F12 along with the victorious T-72 counter.

Note that if the assault had come from hex F11 to the north of the Abrams, it would have survived the assault and been moved into hex F13.

HQs and assault


Do HQ bonuses affect assault?  The answer is - sometimes.  If a unit with an HQ is participating in an assault and does not begin the assault combat under an Ops Complete marker then the HQ bonus dice are added to the assault.

Let's just run through a quick example:





In the example above, the Alpha HQ and an Abrams are in hex F12 and they are Ops Complete.  Maybe they moved and/or fired earlier this turn or maybe they even used opportunity fire to shoot at the Soviets 1st HQ and T-72 approaching them in G12.  Either way, the American units are Ops Complete so when the Soviets enter hex F12 and the assault begins, they will not be able to use their HQ bonus.

On the other hand, the 1st Guards Tank Division and the T-72 in G12 jump are not under Ops Complete and they jump gleefully into hex F12 to scrap it up with the Americans in assault combat.  Because they are not Ops Complete, the HQ can add its bonus (two dice, as shown in the upper left corner of the Soviet HQ counter) to the assault.

The Soviets go first.  The T-72 can normally roll 2 dice and score hit on a roll of 4 or higher.  However, they add in the two HQ bonus dice and are now rolling 4 dice and will score a hit on a roll of 4 or better.  The Americans, however, just get to roll the Abrams normal assault factor of 2 dice with a hit scored on a roll of 4 or higher.

The Soviets roll four dice and get 4/5/2/1.  Two hits are scored on the Americans.  Before we allocate those hits, the Americans can fire back.  They roll two dice and get a 4 and 1. Now we allocate the hits:

The Abrams and the American HQ took more hits than the Soviets so they must retreat.  Without a viable retreat path, they are destroyed.

The Soviet T-72 is disrupted.  Since a unit with an HQ took a hit, we must roll for HQ reduction. We roll a six sided die and the HQ will be reduced on a roll of 1.  Luckily, for the Soviets, they get a "5" and the HQ is fine and dandy.

Disrupted units in Assault

Units that are disrupted before an assault begins can still participate in combat but there are some penalties.  The number of dice on the assault factor stays the same but the to-hit number is raised to "6".

As a result, in the example below, a T-72 moves into hex H11 and starts assault combat with the disrupted Abrams.  The T-72 will roll 2 dice for a hit on 4 or higher.  The Abrams, however, will roll 2 dice but only score a hit on a "6".

The T-72 rolls two dice and gets a 1 and a 4 and scores one hit but this hit is not yet allocated.

The Abrams rolls two dice and gets a 5 and a 6.  The Abrams scores one hit on the T-72.

Hits are now allocated.  The Abrams, already disrupted before the assault, is now reduced.  The T-72 is disrupted.  Since the T-72 was the attacker and it failed to score more hits than the Abrams, it must retreat into the hex from which it attacked so it is moved back to hex I12.



Note that HQ bonuses are still given to disrupted units that are not Ops Complete.  The number of dice added to the assault roll is the same as indicated by the HQ bonus but the "to hit" number will still remain a 6.  This is why it is always a good idea to keep HQs and disrupted units to the rear.  Remember that disrupted units can still move away from the enemy!  So rotate them to the back to avoid them giving the enemy an easy assault win.

Assaults in Cities vs Infantry

Infantry and vehicles conduct assaults in the same exact manner described above EXCEPT when the terrain in which the assault takes place is city/town terrain hexes.

Because infantry are awesome at using built up city hexes to hide in and vehicles are meant for open ground fighting rather than urban combat, this situation is represented in World at War with bonuses given to infantry when involved in urban combat against vehicles.

When infantry are involved in assault in a city hex (whether as attacker or defender) versus vehicles, the infantry gets a +1 bonus to the number of dice it rolls for the assault and a -1 bonus to the "to hit" roll.  The tanks/vehicles still get the same number of assault dice and "to hit" ratings.

Note that this infantry bonus only applies to undisrupted infantry.  Disrupted infantry only roll their normal number of dice as indicated on their counter and only hit on a roll of 6.


Let's look at an example:




In the example above, the T-72 is assaulting into a city hex (N6).  The T-72 will roll its normal assault stats, which is 2 dice for hits on 4+.  Because the infantry are in a city hex, the infantry's number of assault dice increases from 3 to 4 and the to hit is now lowered from 4 to 3.

The T-72 rolls two dice and gets:  6 and 5.  Two hits are scored but not yet allocated.

The US infantry rolls four dice and gets:  1, 3, 6, 6.  The infantry scores three hits on the T-72.

Hits are now allocated.  The US infantry is disrupted and reduced.  The T-72 is eliminated and a wreck marker is placed in hex N6.  Because the US infantry scored more hits on the T-72, it remains in the city hex N6.

The lesson here is to never send your vehicles into a city hex with good order enemy infantry.  Try to soften them up first with your HE firepower or artillery.

Overruns

If your opponent is silly enough to put infantry in the clear terrain within close distance of armored units, then you're in luck!  You can use overrun to send your vehicles into a hex full of infantry (and infantry only) to conduct an overrun.  Vehicles get a considerable bonus when entering a hex full of enemy infantry.  The number of assault dice rolled for the vehicles is tripled although the "to hit" number remains the same.

To conduct an overrun, you simply move your vehicles into the enemy infantry hex but you must make sure you have enough movement points to do so.  Your vehicles pay one extra movement point to enter the hex and they must have enough movement point left to exit the hex afterwards.

Here's an example:




In the picture above, the T-72 in O7 wishes to conduct overrun on the US infantry in hex Q8.  First, we check if enough movement points are available for the overrun.  The T-72 has 7 movement points (as indicated by the number on the bottom center of its counter).  It moves to P7 expending one MP.  Now to enter hex Q8 with the infantry and conduct the overrun it must pay one MP for entering clear terrain and one MP for the overrun itself.  It must have enough MPs left after this to move out of the hex.  The hill behind the infantry in R8 will cost two MPs to enter.  In total, it will cost 5 MPs to conduct this overrun, which is less than the MPs for the T-72.  As a result, the T-72 is eligible to overrun the US infantry in Q8.  It moves to P7, takes some ineffective opportunity fire from the US infantry and enters the hex.

The assault factor for the T-72 is two dice, which is tripled to six dice!  The "to hit" remains the same at 4+.

The overrun begins and the T-72 rolls:  6,4,4,4,6,1.  The US infantry takes five hits.  These hits are not yet allocated.

The US infantry now fires back with its assault factor of 3 dice for 4+ to hit.  It rolls a 5,1,6.

Hits are now allocated.

The T-72 is disrupted and reduced.  The US infantry is disrupted, reduced, and eliminated.

Because the T-72 is disrupted in the attack, it cannot actually move into hex R8 as planned.  It must retreat back to the hex from which it attempted the overrun, so it is moved into P7.

Overrun:  The aftermath.


If the T-72 had not been disrupted in the attack, it would have been allowed to move into the R8 hill hex behind the eliminated infantry.

Note that eliminated infantry are not replaced with wreck markers.

This shows why it's always a good idea to keep your infantry in cover.  Put them in a city or at least a woods hex!

Note that, as in assault, disrupted units have their "to hit" number raised to 6.

I think that covers all the basics.  Please leave a message in the comments section if you see any mistakes or have any questions.

Comments

  1. I enjoy these tutorials immensely. Great work!

    ReplyDelete
  2. Another good one, Brad! I can't wait to get Eisenbach Gap!

    ReplyDelete
    Replies
    1. Thanks Ken! I think you're going to really enjoy it.

      Delete
    2. I do have Nuklear Winter '68, and there seems to be some similarities between it & the WaW series. I love the theme of NW'68, but I'm also looking forward to getting my feet wet with EG.

      Delete
    3. I haven't played N2 '68 but it looks pretty cool. I'll have to check it out when I get some time.

      Delete
  3. Another great article,Brad! Next time, how about artillery and helicopters and airstrikes!

    ReplyDelete
    Replies
    1. Thanks Pascal! I think I have one good article left for this primer and that topic sounds terrific. Many thanks!

      Delete
  4. Well done, Brad, awesome articles! I'm currently underway with some miniatures projects that should be done in a couple of weeks or so, but I'll be all over my Eisenbach Gap and Death of First Panzer right after that!

    ReplyDelete
  5. fyi the elimination on retreat is incorrect.

    ReplyDelete
    Replies
    1. Thanks Kev! Do you mean in all the examples of elimination due to illegal retreat path? What happens to those units instead?

      Delete
    2. If the defender has to retreat, it can go into any of the three rearward hexes away from the assault. In your example, you say it's destroyed because it has to retreat into the water. It can actually retreat into either of the other two.

      Of course, that assumes those are legal retreat hexes (ie, not moving towards another enemy unit).

      Delete
    3. Thanks Dean! I know it talks about the 3 retreat hexes in the FAQ but the rules themselves refer to moving "directly" away from the path of the assault. There seems to be a mix-up in terms there. I guess you could play it either way according to your preference.

      Delete
  6. No...Brad, you are mistaking the retreat of the attacker in Assault or Overrun with the retreat of the defender in an Assault. The rule is clear for retreats for defenders from Assaults.

    The rules say" The defender retreats one hex." The attacker retreats to the hex it came from "from which he entered"

    The Overrun retreat for a defender is not dealt with in the rules...go figure. It would be common sense to apply the Assault Rule for retreat which precedes it.

    As for the FAQ, FAQ does not over rule RAW, Errata yes, FAQ no.

    ReplyDelete
    Replies
    1. Ah okay! Thanks very much, Kev! I'll correct that shortly.

      Delete
    2. Well dude, check it out, to be sure. I just re read my post. Its not meant to be snarky. The other part of the paragraph that messes this up is "directly away", but it then says you can end up NEXT to the dude who attacked you.

      Clear as mud.
      We all know these rules need a clean up. Keep up the good work.

      Delete
    3. Didn't read snarky at all, Kev! Thanks always for the input. I think there is some ambiguity there which just led to some confusion.

      Delete
  7. >>Either way, the American units are Ops Complete so when the Soviets enter hex F12 and the assault begins, they will not be able to use their HQ bonus.

    Where I can find it n rules? I read 6.4 Assaut Combat and see "When assaulting units (whether attacking or defending) include a HQ, the
    HQ’s leadership increases a single unit’s Assault Factor. The HQ itself does
    not attack" only. HQ status Ops Completed does not depend on assault combat -> I can add HQ leadership value to Assault Factor always, is not it?

    ReplyDelete
    Replies
    1. I'm not exactly sure where I saw that originally but it has been commented on in the BGG forums:
      http://boardgamegeek.com/thread/413051/infantry-vs-tanks-and-hq-during-assault
      http://boardgamegeek.com/thread/401912/assaults-qs
      It seems that some people play it this way while others don't. I couldn't find anything specific in the rulebook either to address this question.

      Delete
  8. Is this the same basic engine as Nations at War: White Star Rising?

    ReplyDelete

Post a Comment

Popular Posts